CONTROLLER
The commander screen is a touch command screen so touching a display button pulls up additional menus for informational display or button call out descriptions.
 
Well Commander Controller Features
  • User-friendly color touch screen operation
  • RS232/RS485 communications (CANBUS, MODBUS)
  • 100-260Vac 50-60Hz with 24/12 VDC (optional)
  • Optional
    • Analog Output (4-20mA)
    • Intranet monitoring control and e-mailing
    • Pump discharge pressure (replaces valve outlet pressure)
    • Manual Override of valve operation
    • Valve position transmitter (not required for valve operation)
    • Consult factory for other options and control features as required
 
Combining F buttons displays additional menus. F4 is the primary button and must be depressed while depressing secondary button. Common are listed below, other control functions are covered in the O&M manual.
 
F4+F1- well 1 program page-set up automatic mode of operation for well commander (depth, flow or pressure mode). Also alarm modes (all wells)
F4+F2- (DWC and TWC only) well 2 program page-set up automatic mode of operation for well commander (depth, flow or pressure mode). Also alarm
F4+F3-(TWC only) well 3 program page-set up automatic mode of operation for well commander (depth, flow or pressure mode). Also alarm
TOLL FREE 1.888.628.8258  |  phone: 918.627.1942  |  fax: 918.622.8916  |  7400 East 42nd Place, Tulsa, Oklahoma 74145